RekeyYou can buy new locks to replace your house door locks. This is a costly solution to a simple problem. It wastes locks and doors just for the sake of getting new keys. You may also end up with multiple keys if you have to rekey various locks. Rekeying locks is the best option.

Locksmiths are familiar with the task of rekeying locks. Many homeowners don’t know they can do their own lock rekeying. You can save money by rekeying your locks, especially if you have to rekey multiple locks. Rekeying locks can also be a fun project to help you understand how locks work.

How Locks Work

Door knobs, door levers, or deadbolts have two pins within the plug: driver pins or key pins. Pushing a key into a plug will cause pins to move up and down at different heights.

Driver pins are identical in length and attach to springs. These cannot be removed or replaced when the lock is rekeyed. The key pins are also different in size and will need to be replaced as part of the rekeying process.

The two sets of pins that act as barriers when a lock is locked prevent the plug from turning. The key pins are contacted when a key is inserted into the plug. The driver pins get the key pins. This aligns them at the shear line. This allows the plug to turn and open the lock.

When Is It Time To Rekey The Lock?

When one or more keys are lost or stolen, locks are often rekeyed. The lock(s) is rekeyed to ensure that anyone who may have the key (and can match it with its lock key) cannot open the lock and get in the home.

Locks are used to protecting against thieves and serve to protect the property from renters, housemates, and spouses who leave it.

How to Rekey a Lock

It is easy to rekey a pin or tumbler lock. To remove the lock and pins of different sizes, you will need a variety of tools. You will first need to buy a rekeying kit for your lock brand.

Step 1: Take Out The Doorknob

First, remove the doorknob. You’ll need to align your holes in the cylinder. To do this, either turn the knob counterclockwise while holding it or insert the key and turn it a quarter turn to the right. This step may vary depending on the maker.

After the holes have been aligned, insert your remover tool and press. Then, take the knob off the shank by separating it from the handle.

Step 2: Detach The Cylinder

After you’ve removed the knob, remove the cylinder from its interior. Next, move the cylinder from front to rear until you hear a “click.” using a suitable tool, you will need to remove any cap or other material from the knob’s back.

Once the cylinder has been detached from the knob, remove it by turning it counterclockwise. The springs should come off as well as a set of pins–the key pins and the driver pins. Keep them both separate because they can’t be reinserted into each other.

Step 3: Get The C-Clip

Next, take out the C-clip that holds the cylinder in its place by removing the screw on its top. Once it’s released, a rekeying kit for your lock brand will be able to slide into place easily.

Step 4: Attach The Key Plug

Use the follower tube provided in your kit to remove the key plug from the housing. Attach the follower tube to the back of your cylinder. Once it is attached, insert the key into the lock.

You may need to turn the key 45 degrees for some locks. To hold springs and pins in place, remove the cylinder plug from the cylinder.

Step 5: Get Rid Of The Old Pins

The plug should be removed from the socket. Please take out the key and replace it with a new one. This will reduce the tension spun by the original key. Once removed, get rid of all old pins from the plug and socket.

Step 6: Insert New Pins

As per the instructions, insert new pins. Make sure that they are flush with the plug’s top and aligned with the shear line. Remember: key pins should be inserted in one direction and driver pins in another.

Step 7: Replace The Plug

Place the plugin in the cylinder and push the follower slowly out of the way. Once the plug is in, turn the key until it turns. Replace the C-clip with the follower until it snaps into place.

Step 8: Reattach the knob to the door

Reattach the knob to your door by inserting the cylinder again and aligning the holes. Insert the plug into the hole, making sure that you cover all springs and pins with it.

Now, test out your new keyed door lock. You can directly attach your knob to its place. However, ensure that you have removed the key from the lock before replacing the knob. If it works, congratulations! You’ve successfully rekeyed a lock.

Step 9: Test the lock

After everything feels safe and secure, you can test the lock. Try using a few different keys and see if it works. If so, you have successfully rekeyed your lock! All that’s left to do now is enjoy its new security system.

How to Rekey a Deadbolt lock

If the deadbolt is different from your entry doorknob’s key, you can rekey them if they are identical. Rekey the deadbolt by removing it from your door and repining as with a doorknob.

  • Remove the deadbolt screws from the door and make sure that the bolt is removed.
  • The cylinder should be removed from the housing. The retainer pin should be removed.
  • Replace the endcap and retainer pin with the new ones, and then install the cylinder in the housing.
  • Check that the bolt is not in use, and reconnect the lock to your door.

Is It Legal To Rekey The Locks?

You can rekey locks as long as the property you are a part of is yours. This assumes that there are no other factors. The landlord-tenant laws may limit or prohibit rekeying while the renter still lives at the property. It is also unlikely that you, as a tenant, can rekey locks without permission from the landlord.

These can be complex issues, so consult an attorney about these or any other questions about the legality and legality of rekeying a lock.

Locksmith Services in Brampton, Ontario

Rekeying a door lock is an easy process, but it does require some tools and time to complete. If you need a locksmith to rekey your locks in Brampton, Ontario, or want more information on the process before starting it yourself, don’t hesitate to contact GR Locksmith at (647) 696-8686 for all of your security needs.